Case Studies

Redesigned an RFID circuit to operate from a supercapacitor rather than a battery.

Designed the electronics for a prototype wheelchair for the elderly.

Designed software for a camera attached to a catheter used to view the inside of the...

Wrote the firmware to control a machine that reads data from Biochips.

Designed electronics and code for a device to sterilize the catheter used for home...

Revised the software in a device that tests the applicator for patches that attach to the...

Preliminary design and patent application for the system to prevent electrocution in...

Designed motor control and position sensing for a bone saw.

Designed thermometer with Bluetooth connection.

Designed a board to monitor seniors and tie into home security systems.

Designed a device worn on the calf to detect motion and circumference to assess leg...

Designed a circuit to measure particles in water for industrial water supplies.

Designed the electronics and code for a system to test the next-generation FPGAs.

Fixed the firmware to resolve problems in an electric bicycle.

Advised on how new materials would affect different battery use cases.

Researched and recommended a dozen technologies to measure the position of a medical...

Revised a circuit to pass emissions and immunity testing.

Wrote a driver that works with QNX for a data acquisition system.

Upgraded the design of generator electronics to fix problems.

Designed OBDII plug-in with cellular modem communication and speed limiting to improve...

Wrote firmware to communicate over Bluetooth LE and provide emergency alarms.

Redesigned the intercom board used in emergency vehicles, such as fire engines.

Designed wireless communication between a gurney and the eye surgery machine to...

Design of a UV room sterilizer with WiFi connectivity for safety.

Revised the firmware to make the WiFi easy to connect.

Revised the firmware to make the device reliable.

Wrote firmware for a vehicle-mounted system of cameras and GPS that records the position...

Analyzed the power consumption and battery life to extend the operating time of a drone.

Monitors the weight of milk consumed by nursing babies to make sure they are getting...

Did architecture design with the client on the best path forward for development with a...

Designed the controller using heat and ultrasound to apply cosmetics to the skin. 500,000...

Designed a circuit that allows a USB plug to be installed in either orientation.

Designed a production tester for a motor control circuit we designed.

Architecture design for a farm tractor guidance system.

Designed a system for remote monitoring of the fuel level in tanks at a rocket launch...

Worked on sensors for a linear accelerator for cancer treatment.

Performed verification testing of software that measures urine flow with just a...

Designed electronics to control LED lights of a wavelength that makes cancer cells...

Revised the electronics to reduce cost and replace obsolete components.

Designed a mass flow control circuit, the next generation for a company selling mass flow...

Designed a ring with a thumb-activated actuator for AR glasses.

Designed a tester that applies torque with a predefined profile to test a drug injector.

Designed multiple output current supplies for semiconductor testing.

Performed design assistance on a braille printer for a startup with inexperienced...

Designed and built a device to monitor the location, load, and activities of a cement...

Delivered cost reduction of boards in a high-end video camera for movie studios.

Designed and built a data acquisition system to measure strain gauges mounted on a rocket...

Designed a board to perform diagnostics on the linear accelerator.

Wrote firmware for a dog-tracking device.

Designed a circuit to operate the lock in a bicycle locker that is placed at transit...

Architecture design of video and FPGA that fits into the small form factor.

Designed and installed a liquid Nitrogen metering system in multiple laboratories for...

Changed wiring and power supply, then tested for compliance.

Wrote the firmware for a wearable device that applies electrical stimulation to control...

Designed monitor for AED that sends images over cellular modem and runs for two years on...

Revision of the electronics in an air particle analyzer for use on the space station.

Wrote software to collect data from several dozen devices measuring various soil...

Designed a circuit to measure radiation dose in a linear accelerator for cancer therapy.

Wrote software and FPGA code to support a gene sequencing chip.

Designed a device to measure temperature, pressure, and flow for energy audits at offices.

Designed LED modules and the main unit that they communicate with to provide a...

Designed the circuit to control the dispensing of products for sales and WiFi...

Designed a device that securely stores a Bitcoin password and connects to a cell phone.

Designed a device for people with spinal injuries to indicate when their bladder is full.

Designed a motor controller to move monitors in a wall of monitors that make very large...

Provided a design review of a new laser control circuit.

Designed a flexible board for a camera on an endoscope for safe intubation.

Designed the circuit in the catheter handle for temperature and pressure monitoring.

Designed a high-voltage tester for pacemaker manufacturing.

Built a test setup and measured the ability to measure temperature with ultrasound.

Designed and built a UV detector to protect operators on a medical device testing line.

Designed the electronics and firmware to control the motor in a catheter.

Designed and built a prototype Optical Coherence Tomography device.

Revised the design to fix deficiencies in an industrial Oxygen sensor.

Rebuilt the electronics and rewrote the code in a test station for catheters.

Provided design review and 60601 documentation of control circuit for inhaled nicotine...

Fixed temperature control and design for manufacturing in a device that kills lice with...

Designed board to measure capacitance on the pins of an NFC chip as part of a full chip...

Designed equipment to test a cryoballoon catheter for temperature and pressure.

Did feasibility testing of actuators for each finger to detect electronic signals...

Performed a design review of the electronics in a consumer robot.

Designed a circuit to control a string of LEDs used for lighting.

Designed a strain gauge signal conditioning board for a company that sells industrial...

Designed the motor control and position sensing for a bone drill that stops drilling when...

Designed prototype board for a POS system.

Designed load cell circuit to measure the movement of rats in a cage as part of a system...

Designed a tester for a medical device that applies cold or heat to limbs to treat...

Designed a tester using an interferometer to precisely measure a pump in production.

Developed a circuit to apply and measure voltage and current in a chip tester.

Designed portions of the MRI machine and helped meet ISO 60601 requirements.

Enhanced the device electronics and software to detect moving metal at many meters for...

Design work on a device to show advertising on the license plate of a car.

Conducted architectural work on a blood analysis machine, and wrote firmware to fix a...

Fixed an analog circuit design problem in a two-hour design review.

Designed dev kit for industrial pH sensor.

Developed a compact battery with a charger that can be recharged directly from a 120 VAC...

Designed a night vision camera circuit that combines IR and visible light for a wearable...

Preliminary design of a small wearable device to overcome sleep apnea and an FDA...

Designed an electronic camera interface for an endoscope.

Performed a design review on a new type of wireless charging.