Company / News

5x Battery Life for Electric IMP based Product

Connected Pet based on Electric IMP

Recently, we worked with a startup to improve the battery life for their connected product. It was based on the Murata’s impModule™ module with an ARM processor and WiFi transceiver. They needed a battery life of many weeks, and it was less than one week.

First, we looked at various parts of the circuit and how much current they drew:

  • Load cells that measured weight
  • WiFi connection
  • LEDs
  • Processor

Then, we looked for the optimal trade-off between powering the parts of the circuit and current draw. Our goal was to minimize the current and maximize its effectiveness.

We did four major tasks to maximize the battery life:

  1. Redesigned the load sensing device to reduce the current needed
  2. Made sure the WiFi connection was only turned on periodically
  3. Put the micro-processor into sleep mode, waking up the system only when needed
  4. Carefully planned and batched our network operations

Using a more efficient way to hook up the load cells reduced the battery requirements. Because wireless network activities drain the battery very quickly, we were able to reduce power consumption considerably by planning and batching our network operations, which means the WiFi connection was only turned on periodically for a short time, and then shut off. We found an error in the code that was supposed to put the micro-processor it into sleep mode, but it was not working. We arranged for the microprocessor to wake up every 15 minutes to check if any activity was needed.

These hardware changes required changes to the circuit board, but software changes had the most impact. In the end, we increased the battery life by 5 times, which was critical to making the product a success.

As a result of our work, Obe’s Pro-Bowl has won the first-ever Pet Care Innovation Prize powered by Purina.

Tell us about your next design project

Do you have a question about our services, pricing, samples, resources, or anything else?

Contact Us Now

Related News

Bay Area Makers Faire 2015

This weekend I attended the Bay Area Maker Faire.  Here...

Fusion Design on Silicon Valley –...

In this short video, Mark Brinkerhoff, President of Fusion Design...

Volume 2012, Issue 4 Newsletter

In This Issue: How to Effectively Communicate Product Development Risks...

Newsletter Sign Up
Get Expert Consulting

Voler is really good at identifying risks and finding the best way to do a project on-time, on spec, and easy to manufacture.