Company / News

Laser Measurements at Superfund Site

laser measurements
mud in cars

Voler designed, built, and installed a system to measure the volume of mud put in rail cars at the Hylebos Superfund Site in Tacoma, Washington, using an array of lasers. Mud was dredged from the bay and dumped in rail cars for shipment. It had to be measured accurately because of the high cost of waste disposal. We installed the equipment and did extensive custom software to detect the presence of the container, measure the mud with a laser, calculate the volume, display the results on a computer screen, and report the results in a database which was accessed over the on site network.

There was a tight schedule, and the measurements were difficult because the rain and sun tended to interfere with the laser sensing. The dark black wet mud was a difficult surface to measure with a laser, but Voler found a laser that worked. The work was completed on time and the system ran without failure for 7 months until the project was completed.

 

Related News

Data Acquisition Basics

Data acquisition is the sampling of continuous real world information...

Adding Value to a Mechanical Team

Recently we engaged with a small company with strong mechanical and...

Wearable and Remote Patient Monitoring Webinar...

Pitfalls of Medically Accurate Measurements In this webinar, Walt Maclay...

Newsletter Sign Up
chat-icon
clse-1
Get Expert Consulting

Voler is really good at identifying risks and finding the best way to do a project on-time, on spec, and easy to manufacture.