Company / News

Laser Measurements at Superfund Site

laser measurements
mud in cars

Voler designed, built, and installed a system to measure the volume of mud put in rail cars at the Hylebos Superfund Site in Tacoma, Washington, using an array of lasers. Mud was dredged from the bay and dumped in rail cars for shipment. It had to be measured accurately because of the high cost of waste disposal. We installed the equipment and did extensive custom software to detect the presence of the container, measure the mud with a laser, calculate the volume, display the results on a computer screen, and report the results in a database which was accessed over the on site network.

There was a tight schedule, and the measurements were difficult because the rain and sun tended to interfere with the laser sensing. The dark black wet mud was a difficult surface to measure with a laser, but Voler found a laser that worked. The work was completed on time and the system ran without failure for 7 months until the project was completed.

 

Tell us about your next design project

Do you have a question about our services, pricing, samples, resources, or anything else?

Contact Us Now

Related News

Secure or Nothing – Why device...

Any electronic device you're looking to develop that's meant for...

Where to Start When Developing Medical...

A good starting place for help when you want to...

Quantified Self’s Guide to Self-Tracking Tools...

Fascinating Resource Recently I attended a TiE event on "Quantified...

Newsletter Sign Up
chat-icon
clse-1
Get Expert Consulting

Voler is really good at identifying risks and finding the best way to do a project on-time, on spec, and easy to manufacture.